LCD Display Essentials
Battery Indicator and Voltage/Percentage Display on Your eBike/Electric Trike
To ensure you can keep track of your remaining ride time, your eBike or electric trike comes equipped with a comprehensive battery monitoring system on the LCD display: Visual Indicator: Located on the left side of the LCD display, the battery indicator provides a quick visual reference of your battery's charge level, using a scale from 1 to 5 bars. This immediate visual feedback is invaluable for understanding how much power you have remaining during a ride. Battery Levels: As the battery depletes, the number of filled bars will decrease correspondingly. When the battery's charge level drops below 5%, the display will show no bars, and the battery icon will begin to flash, signaling that it's time to recharge your eBike/electric trike. Voltage/Percentage Readout: On the top right corner of the display, the current battery voltage is displayed, providing a precise measure of the remaining battery life. For those who prefer a more general indicator, this readout can be switched to show the remaining charge as a percentage. You can toggle between these two formats in the display's settings menu, allowing you to monitor your battery status in the format that suits you best. Efficient Energy Management: This dual-format system of monitoring battery life—either through voltage or percentage—ensures that you're always informed about the energy status of your eBike/electric trike. With this knowledge, you can plan your journeys more effectively and time your recharges to maintain consistent power for all your trips. Staying informed about the battery level is a crucial aspect of managing the energy use on your eBike/electric trike, ensuring you have a reliable and enjoyable ride every time. If you need further assistance or have any questions about the battery indicators or changing the display settings on your eBike/electric trike, please don't hesitate to reach out at support@perraroelectricbike.com or call (949) 414-8003.
Learn morePower Meter on Your eBike or Electric Trike's LCD Display
The power meter featured on the display of your electric trike or e-bike serves as an instant visual guide to the motor's power output. You'll notice a vertical bar on the right side of the display that adjusts its height to match the current level of power: Minimum Level: When the bar is at the bottom, it indicates no power assist from the motor, as displayed by "0." In this state, your electric bike/trike is in manual mode, propelled only by your pedaling effort. Intermediate Levels: As the bar ascends, it changes color from green to yellow, then orange, and finally to pink, each step up representing a stronger contribution from the motor to assist your ride. Maximum Level: When the bar is fully extended at the top, showing in red, it signifies full power assist. This setting provides the greatest ease in pedaling, particularly beneficial when facing steep inclines or needing a break from intense pedaling. This dynamic bar allows you to gauge the motor assist level at a glance, helping you modify your input or the bike/trike's settings as you see fit during your ride.If you require any help or have questions about the power meter or any other electric bike/trike features, please contact us at support@perraroelectricbike.com or call (949) 414-8003.
Learn moreWalk Assist Mode on Your Electric Bike/Trike
Walk Assist Mode is a feature designed to help you move your electric bike or trike alongside you while walking, without exerting the full effort of manually pushing its weight. This mode provides a low-power motor assist that moves the bike/trike at a slow, steady pace, matching walking speed. Activating Walk Assist Mode: Starting Walk Assist: To activate Walk Assist Mode, press and hold the “-” button on your Engagement: Continue to hold the “-” button for 2 seconds. Upon doing so, the bike/trike’s display will switch to indicate that Walk Assist Mode is active. A “Walking Icon” appears in the PAS display area, signaling that the feature is engaged. In Action: Once activated, the motor will provide a gentle forward motion. This allows you to comfortably walk alongside your bike/trike without pushing it entirely with your own strength. It’s particularly helpful when navigating through areas where riding isn’t possible or when moving up ramps and inclines. Exiting Walk Assist Mode: Deactivation: To deactivate Walk Assist Mode, simply release the “-” button. The trike will stop providing motor assist, and you can then manually push the bike/trike or climb back on to ride as usual. When to Use Walk Assist Mode: Navigating Crowds: Ideal for moving through crowded spaces where riding might be difficult or prohibited. Inclines and Ramps: Offers assistance when going up slopes, ramps, or any inclined surfaces where pushing the bike/trike can be challenging. Indoor Spaces: Useful in indoor areas or transit stations where riding is not allowed but you need to move the bike/trike from one place to another. Remember, Walk Assist Mode is intended to help you move the bike/trike at a walking pace. It is not designed for riding, and you should not attempt to ride the bike/trike while this mode is engaged to ensure safety. Always check your surroundings and ensure you have a clear path while using Walk Assist Mode to prevent accidents or damage to the bike/trike. For additional help or inquiries, you can contact at support@perraroelectricbike.com or call (949) 414-8003.
Learn morePedal Assist (PAS) Level Selection on Your Electric Bike/Trike
The Pedal Assist System (PAS) enhances your cycling experience by providing varying levels of motor assistance as you pedal. Adjusting the PAS levels is simple and intuitive, using the “+” or “-” buttons on your handlebar controls. Understanding the PAS Interface and Levels: Refer to the color-coded PAS level indicators on the LCD display of your electric bike or trike: Level 0 (Gray): No assistance. The bike/trike is purely manual, akin to a traditional cycle. Level 1 (Green): Minimal assistance, adding a slight boost to your pedaling, ideal for a leisurely ride or when you want more exercise. Level 2 (Yellow): Moderate assistance, providing a good balance between your pedaling efforts and the motor's support. Level 3 (Orange): Noticeable assistance, reducing strain during pedaling, especially on slight inclines or longer journeys. Level 4 (Pink): High assistance, for when you need more help from the motor to maintain speed with less effort. Level 5 (Red): Maximum assistance, to easily tackle steep hills or strong headwinds with minimal pedaling. How PAS Works: Startup Default: When you turn on your bike/trike, it starts at level “1”, providing a gentle assist. Zero-Assist Mode: At level “0”, both the pedal assist and throttle (if available) are disabled, offering you the traditional biking experience. Efficient Riding: Lower levels of PAS make your battery last longer, while higher levels give more power but consume more battery. Automatic Shutdown: To conserve battery, the display will power off if no activity is detected for a certain period. Adjusting PAS Levels: To select your desired level of assistance, tap the “+” button to increase or the “-” button to decrease the PAS level. The display will change color according to the selected level, providing a clear visual cue of your current setting. This feature allows you to tailor your riding experience to your current terrain, energy level, or workout goals. For visual guidance, the attached figure illustrates the PAS level indicators: With this PAS feature, you can enjoy a customizable ride that adapts to your preferences, ensuring every journey is as enjoyable and efficient as possible. For additional help or inquiries, contact support@perraroelectricbike.com or call (949) 414-8003.
Learn moreOperating the Headlight Switch on Your Electric Bike/Trike
To turn on the headlight of your electric bike or trike, follow these steps based on your model's control type: If there is a specific headlight button: Press this button to toggle the headlights on and off. If there isn't a dedicated headlight switch: Activate the headlights by long-pressing the “+” button for 2 seconds. This action will turn on the headlights and illuminate the headlight indicator icon on the display. To turn off the headlights, simply long-press the “+” button again for 2 seconds. For additional help or inquiries, you can contact us at support@perraroelectricbike.com or call (949) 414-8003.
Learn moreTurning On Your Bike/Trike: LCD Display Operation Guide
To turn on the LCD display of your electric trike / ebike, simply press and hold the Power button for 2 seconds. To switch it off, press and hold the Power button again for the same duration, and the display will shut down. The display also features an energy-saving automatic shut-off function. If there's no activity (indicated by a speed reading of 0) for 5 minutes, it will turn off automatically to conserve battery power.
Learn moreWelcome to Your Perraro Electric Bike/Trike LCD Display
Discover the sophistication of your Perraro Electric Bike or Trike through its intuitive LCD Display. Crafted to enhance your riding journey, this user-friendly display provides essential information effortlessly. With its clear, easy-to-read interface, it integrates seamlessly with the advanced technology of your electric bike or trike. The display serves as your central command center, offering real-time data about your ride. It allows you to monitor speed, battery life, adjust assist settings, and track the distance of your journey. Whether navigating the bustle of the city or exploring serene trails, this display keeps you informed and in full control of your ride. The LCD Display on your Perraro Electric Bike or Trike is not just a display; it's a key part of your riding experience. It brings convenience, efficiency, and fun together, making every trip a delight. Welcome to the future of riding with cutting-edge technology at your fingertips. Key Features of Your Bike/Trike's LCD Display: Headlight Indicator: Indicates when the headlight is on. Speedometer: Shows current speed in either KM/H or MPH. Assist Level Indicator: Displays the current level of power assist from 1st to 5th gear; ‘0’ means power assist is off. Battery Indicator: A detailed display of the battery charge, including a power percentage. Power Output: Provides the current power output in watts, with a detailed 10-segment indicator for motor power levels. Ride Timer: Counts your trip duration in hours and minutes. Odometer: Measures the distance traveled per trip. Range Estimator: Offers an estimated remaining range based on the current battery level and assist gear, requiring BMS support for precision. For additional help or inquiries, you can contact us at support@perraroelectricbike.com or call (949) 414-8003.
Learn more