Display Readouts:
- Location 1: Walk Mode, Cruise Control, and Pedal Assist (PAS) Level Indicator.
- Location 2: Odometer, Trip A, Voltage, Current, Trip Timer (TM) readouts.
- Location 3: Battery level indicator bar.
- Location 4: Speedometer in MPH or KM/H.
- Location 5: Light On/Off Indicator.
- Location 6: Mile and kilometer indicators.
Operating the LCD Display:
- Turning the Bike ON/OFF: Hold the power button until the display turns on.
- Increase Pedal Assist Level: Press the plus (+) button.
- Decrease Pedal Assist Level: Press the minus (-) button.
- Turn ON/OFF Front/Rear Lights: Hold the plus (+) button for 3 seconds until lights turn on, repeat to turn off.
- Toggle Odometer, Trip A, Trip B, Voltage, Current, Trip Timer (TM): Press and release the power button.
- Max Speed and Average Speed: Press and hold the plus (+) and power buttons simultaneously to toggle between the speedometer, max speed, and average speed.
Notes:
- The trip meter resets when the bike is powered off.
- The maximum and average speed are calculated for a given trip and reset upon powering off.
- After 10 minutes of inactivity, the display automatically shuts down, deactivating the pedal assist and throttle.
For more detailed operation guidelines, refer to your Perraro electric bike or trike user manual.
If you have any questions or need assistance, please contact our support team at support@perraroelectricbike.com or call us at (949) 414-8003.